/////////////////////////////////////////////////////////////////////////////// 
// Copyright (C) 2002-2025, Open Design Alliance (the "Alliance"). 
// All rights reserved. 
// 
// This software and its documentation and related materials are owned by 
// the Alliance. The software may only be incorporated into application 
// programs owned by members of the Alliance, subject to a signed 
// Membership Agreement and Supplemental Software License Agreement with the
// Alliance. The structure and organization of this software are the valuable  
// trade secrets of the Alliance and its suppliers. The software is also 
// protected by copyright law and international treaty provisions. Application  
// programs incorporating this software must include the following statement 
// with their copyright notices:
//   
//   This application incorporates Open Design Alliance software pursuant to a license 
//   agreement with Open Design Alliance.
//   Open Design Alliance Copyright (C) 2002-2025 by Open Design Alliance. 
//   All rights reserved.
//
// By use of this software, its documentation or related materials, you 
// acknowledge and accept the above terms.
///////////////////////////////////////////////////////////////////////////////

// This file is generated automatically.

#ifndef _IFC4X3_RC1_IFCALIGNMENT2DVERSEGTRANSITION_AUTO_IMPL_H
#define _IFC4X3_RC1_IFCALIGNMENT2DVERSEGTRANSITION_AUTO_IMPL_H

#include "IfcAlignment2DVerticalSegmentAutoImpl.h"

#include "TD_PackPush.h"

/** \details
  The namespace contains schema-dependent classes, definitions and sub routines
  for work with IFC4X3_RC1 express schema definitions.
*/
namespace OdIfc4x3_rc1 {

/** \details
  An IfcAlignment2DVerSegTransition is a 2D transition curve using the inherited attributes from IfcAlignment2DVerticalSegment.
*/
class IFC4X3_RC1_EXPORT IfcAlignment2DVerSegTransition : public IfcAlignment2DVerticalSegment
{
  //DOM-IGNORE-BEGIN
  OD_EXP_DECLARE_MEMBERS(OdIfc4x3_rc1::IfcAlignment2DVerSegTransition);
  //DOM-IGNORE-END

public:


  //
  // OdDAI early binding accessors
  //


  /** \details
  Returns the value of StartRadius attribute. 
  This attribute represents the radius of the curve at the start point. 
  If the radius is not provided by a value, i.e. being NIL, 
  it is interpreted as INFINITE, the StartPoint is at the point where it does not have a curvature.
  \returns
  Returns the value of StartRadius attribute.
  */
  double getStartRadius() const;

  /** \details
  Sets the value of StartRadius attribute. 
  This attribute represents the radius of the curve at the start point. 
  If the radius is not provided by a value, i.e. being NIL, 
  it is interpreted as INFINITE, the StartPoint is at the point where it does not have a curvature.
  \param StartRadius [in] StartRadius attribute to set.
  */
  void setStartRadius(double StartRadius);

  /** \details
  Returns the value of EndRadius attribute. 
  This attribute represents the radius of the curve at the end point. 
  If the radius is not provided by a value, i.e. being NIL, 
  it is interpreted as INFINITE, the end point is at the point where it does not have a curvature.
  \returns
  Returns the value of EndRadius attribute.
  */
  double getEndRadius() const;

  /** \details
  Sets the value of EndRadius attribute. 
  This attribute represents the radius of the curve at the end point. 
  If the radius is not provided by a value, i.e. being NIL, 
  it is interpreted as INFINITE, the end point is at the point where it does not have a curvature.
  \param EndRadius [in] EndRadius attribute to set.
  */
  void setEndRadius(double EndRadius);

  /** \details
  Returns the value of IsStartRadiusCCW attribute. 
  This attribute indicates whether the curve starts counter-clockwise or clockwise. 
  The orientation of the curve is IsCcw=true, if the spiral arc goes counter-clockwise as seen from the right side of the curve, 
  or "to the upside", and with IsCcw=false if the spiral arc goes clockwise, or "to the downside".
  \returns
  Returns the value of IsStartRadiusCCW attribute.
  */
  OdDAI::Boolean getIsStartRadiusCCW() const;

  /** \details
  Sets the value of IsStartRadiusCCW attribute. 
  This attribute indicates whether the curve starts counter-clockwise or clockwise. 
  The orientation of the curve is IsCcw=true, if the spiral arc goes counter-clockwise as seen from the right side of the curve, 
  or "to the upside", and with IsCcw=false if the spiral arc goes clockwise, or "to the downside".
  \param IsStartRadiusCCW [in] IsStartRadiusCCW attribute to set.
  */
  void setIsStartRadiusCCW(OdDAI::Boolean IsStartRadiusCCW);

  /** \details
  Returns the value of IsEndRadiusCCW attribute. 
  This attribute indicates whether the curve ends counter-clockwise or clockwise. 
  The orientation of the curve is IsCcw=true, if the spiral arc goes counter-clockwise as seen from the right side of the curve, 
  or "to the upside", and with IsCcw=false if the spiral arc goes clockwise, or "to the downside".
  \returns
  Returns the value of IsEndRadiusCCW attribute.
  */
  OdDAI::Boolean getIsEndRadiusCCW() const;

  /** \details
  Sets the value of IsEndRadiusCCW attribute. 
  This attribute indicates whether the curve ends counter-clockwise or clockwise. 
  The orientation of the clothoidal arc is IsCcw=true, if the spiral arc goes counter-clockwise as seen from the right side of the curve, 
  or "to the upside", and with IsCcw=false if the spiral arc goes clockwise, or "to the downside".
  \param IsEndRadiusCCW [in] IsEndRadiusCCW attribute to set.
  */
  void setIsEndRadiusCCW(OdDAI::Boolean IsEndRadiusCCW);

  /** \details
  Returns the value of TransitionCurveType attribute. 
  This attribute represents the specific type of transition curve.
  \returns
  Returns the value of TransitionCurveType attribute.
  */
  IfcTransitionCurveType getTransitionCurveType() const;

  /** \details
  Sets the value of TransitionCurveType attribute. 
  This attribute represents the specific type of transition curve.
  \param TransitionCurveType [in] TransitionCurveType attribute to set.
  */
  void setTransitionCurveType(IfcTransitionCurveType TransitionCurveType);


public:

  /** \details
  Default constructor for the IfcAlignment2DVerSegTransition class.
  */
  IfcAlignment2DVerSegTransition();

  /** \details
  Reads object's data from the specified filer.
  \param rdFiler [in] Pointer to a filer from which to read the data.
  \returns
  A value of OdResult type that contains the result of the method execution.
  */
  virtual OdResult inFields(OdDAI::OdSpfFilerBase* rdFiler) override;

  /** \details
  Writes object's data the the specified filer.
  \param wrFiler [in] Pointer to a filer to which to write the data.
  \returns
  A value of OdResult type that contains the result of the method execution.
  */
  virtual OdResult outFields(OdDAI::OdSpfFilerBase* wrFiler) override;

  /** \details
  Returns a type of a class instance.
  \returns
  Pointer to the <exref target="OdDAI__Entity.html">OdDAI::Entity</exref> type that determines an entity definition within a schema.
  */
  virtual OdDAI::Entity* getInstanceType() const override;

  /** \details
  Returns an attribute value for the specified attribute name.
  \param attrName [in] Name of an attribute to query.
  \returns
  OdRxValue object that represents a generic variant type value.
  */
  virtual OdRxValue getAttr(const char * attrName) const override;

  /** \details
  Early-bound version of instances comparison.
  \param pOther [in] Other application instance.
  \param ordering [out] Receives the ordering (comparison) status.
  \returns
  true if comparison was performed, false if method has no implementation, so late-bound version could be applied.
  \remarks
  If the method returns true,
  the ordering parameter can receive one of the following statuses:
  <table>
    Name             Value    Description
    _kLessThan_      -1       This object < Other Object.
    _kEqual_          0       This object = Other Object.
    _kGreaterThan_    1       This object > Other Object.
    _kNotOrderable_   2       This class is not orderable.
  </table>
  */
  virtual bool comparedToEarlyImpl(const OdDAI::ApplicationInstance *pOther, OdRx::Ordering &ordering) const override;

  /** \details
  Resets a value for the specified attribute.
  \param explicitAttrName [in] Explicit name of the attribute to reset.
  */
  virtual void unsetAttr(const char * explicitAttrName) override;

  /** \details
  Checks whether the specified attribute is set.
  \param explicitAttrName [in] Explicit name of the attribute to test.
  \returns
  true if the specified attribute is set, false otherwise.
  */
  virtual bool testAttr(const char * explicitAttrName) const override;

  /** \details
  Sets the specified attribute with a given value.
  \param explicitAttrName [in] Explicit name of the attribute to set.
  \param val [in] Value to set.
  \returns
  true if the value is successfully set for the specified attribute, false otherwise.
  */
  virtual bool putAttr(const char * explicitAttrName, const OdRxValue &val) override;

  /** \details
  Checks whether the specified instance is the object derived from or belongs to this class.
  \param entityType [in] Entity to check.
  \returns
  true if the specified instance is the object derived from or belongs to this class, false otherwise.
  */
  virtual bool isKindOf(OdIfc::OdIfcEntityType entityType) const override;

  /** \details
  Returns the type of this entity.
  \returns
  A value of the <exref target="OdIfc__OdIfcEntityType.html">OdIfc::OdIfcEntityType</exref> type that represents type of this entity.
  */
  virtual OdIfc::OdIfcEntityType type() const override;

  /** \details
  Returns an attribute value for the specified attribute definition.
  \param attrDef [in] Attribute definition to query.
  \returns
  OdRxValue object that represents a generic variant type value.
  */
  virtual OdRxValue getAttr(const OdIfc::OdIfcAttribute attrDef) const override;

  /** \details
  Resets a value for the specified attribute.
  \param explicitAttrDef [in] Explicit definition that represents an attribute to reset.
  */
  virtual void unsetAttr(const OdIfc::OdIfcAttribute explicitAttrDef) override;

  /** \details
  Checks whether the specified attribute is set.
  \param explicitAttrDef [in] Attribute definition to test.
  \returns
  true if the specified attribute is set, false otherwise.
  */
  virtual bool testAttr(const OdIfc::OdIfcAttribute explicitAttrDef) const override;

  /** \details
  Sets the specified attribute with a given value.
  \param explicitAttrDef [in] Explicit attribute definition to set.
  \param val [in] Value to set.
  \returns
  true if the value is successfully set for the specified attribute, false otherwise.
  */
  virtual bool putAttr(const OdIfc::OdIfcAttribute explicitAttrDef, const OdRxValue &val) override;

protected:
  // Fields declaration: 
  IfcPositiveLengthMeasure m_StartRadius;   // IfcPositiveLengthMeasure  [optional]
  IfcPositiveLengthMeasure m_EndRadius;   // IfcPositiveLengthMeasure  [optional]
  OdDAI::Boolean m_IsStartRadiusCCW;   // IfcBoolean
  OdDAI::Boolean m_IsEndRadiusCCW;   // IfcBoolean
  OdDAI::Enum m_TransitionCurveType;   // IfcTransitionCurveType
};

/** \details
  A data type that represents a smart pointer to a <exref target="OdIfc4x3_rc1__IfcAlignment2DVerSegTransition.html">IfcAlignment2DVerSegTransition</exref> object.
*/
typedef OdSmartPtr<IfcAlignment2DVerSegTransition> IfcAlignment2DVerSegTransitionPtr;

} // namespace

#include "TD_PackPop.h"

#endif // _IFC4X3_RC1_IFCALIGNMENT2DVERSEGTRANSITION_AUTO_IMPL_H