/////////////////////////////////////////////////////////////////////////////// 
// Copyright (C) 2002-2025, Open Design Alliance (the "Alliance"). 
// All rights reserved. 
// 
// This software and its documentation and related materials are owned by 
// the Alliance. The software may only be incorporated into application 
// programs owned by members of the Alliance, subject to a signed 
// Membership Agreement and Supplemental Software License Agreement with the
// Alliance. The structure and organization of this software are the valuable  
// trade secrets of the Alliance and its suppliers. The software is also 
// protected by copyright law and international treaty provisions. Application  
// programs incorporating this software must include the following statement 
// with their copyright notices:
//   
//   This application incorporates Open Design Alliance software pursuant to a license 
//   agreement with Open Design Alliance.
//   Open Design Alliance Copyright (C) 2002-2025 by Open Design Alliance. 
//   All rights reserved.
//
// By use of this software, its documentation or related materials, you 
// acknowledge and accept the above terms.
///////////////////////////////////////////////////////////////////////////////

// This file is generated automatically.

#ifndef _IFC2X3_IFCSWEPTAREASOLID_AUTO_IMPL_H
#define _IFC2X3_IFCSWEPTAREASOLID_AUTO_IMPL_H

#include "IfcSolidModelAutoImpl.h"
#include "IfcProfileDefAutoImpl.h"
#include "IfcAxis2Placement3DAutoImpl.h"

#include "TD_PackPush.h"

/** \details
  The namespace contains schema-dependent classes, definitions and sub routines
  for work with IFC2X3 express schema definitions.
*/
namespace OdIfc2x3 {

/** \details
  An IfcSweptAreaSolid represents the 3D shape by a sweeping representation scheme 
  allowing a two dimensional planar cross section to sweep through space.
  The swept area is defined by a cross section, represented by a subtype of IfcProfileDef, 
  that is provided as a closed two-dimensional boundary on an implicit plane. 
  The swept area is defined in the XY plane of the object coordinate system. 
  The sweeping operation is applied to the swept area as defined within the subtypes of IfcSweptAreaSolid, 
  some subtypes require an implicit transformation of the swept area to the start position of the sweep.

  \remarks
  This definition may not be instantiated
*/
class IFC2X3_EXPORT IfcSweptAreaSolid : public IfcSolidModel
{
  //DOM-IGNORE-BEGIN
  OD_EXP_NON_INSTANTIABLE_DECLARE_MEMBERS(OdIfc2x3::IfcSweptAreaSolid);
  //DOM-IGNORE-END

public:


  //
  // OdDAI early binding accessors
  //


  /** \details
  Returns the value of SweptArea attribute. 
  This attribute represents the surface defining the area to be swept. 
  It is given as a profile definition within the XY plane of the position coordinate system.
  \returns
  Returns the value of SweptArea attribute.
  */
  const OdDAIObjectId& getSweptArea() const;

  /** \details
  Sets the value of SweptArea attribute. 
  This attribute represents the surface defining the area to be swept. 
  It is given as a profile definition within the XY plane of the position coordinate system.
  \param SweptArea [in] Swept area to set.
  */
  void setSweptArea(const OdDAIObjectId& SweptArea);

  /** \details
  Returns the value of Position attribute. 
  This attribute represents position coordinate system for the resulting swept solid of the sweeping operation. 
  The position coordinate system allows for re-positioning of the swept solid. 
  If not provided, the swept solid remains within the position as determined by the cross section 
  or by the directrix used for the sweeping operation.
  \returns
  Returns the value of Position attribute.
  */
  const OdDAIObjectId& getPosition() const;

  /** \details
  Sets the value of Position attribute. 
  This attribute represents position coordinate system for the resulting swept solid of the sweeping operation. 
  The position coordinate system allows for re-positioning of the swept solid. 
  If not provided, the swept solid remains within the position as determined by the cross section 
  or by the directrix used for the sweeping operation.
  \param Position [in] Position to set.
  */
  void setPosition(const OdDAIObjectId& Position);


public:

  /** \details
  Reads object's data from the specified filer.
  \param rdFiler [in] Pointer to a filer from which to read the data.
  \returns
  A value of OdResult type that contains the result of the method execution.
  */
  virtual OdResult inFields(OdDAI::OdSpfFilerBase* rdFiler) override;

  /** \details
  Writes object's data the the specified filer.
  \param wrFiler [in] Pointer to a filer to which to write the data.
  \returns
  A value of OdResult type that contains the result of the method execution.
  */
  virtual OdResult outFields(OdDAI::OdSpfFilerBase* wrFiler) override;

  /** \details
  Returns a type of a class instance.
  \returns
  Pointer to the <exref target="OdDAI__Entity.html">OdDAI::Entity</exref> type that determines an entity definition within a schema.
  */
  virtual OdDAI::Entity* getInstanceType() const override;

  /** \details
  Returns an attribute value for the specified attribute name.
  \param attrName [in] Name of an attribute to query.
  \returns
  OdRxValue object that represents a generic variant type value.
  */
  virtual OdRxValue getAttr(const char * attrName) const override;

  /** \details
  Early-bound version of instances comparison.
  \param pOther [in] Other application instance.
  \param ordering [out] Receives the ordering (comparison) status.
  \returns
  true if comparison was performed, false if method has no implementation, so late-bound version could be applied.
  \remarks
  If the method returns true,
  the ordering parameter can receive one of the following statuses:
  <table>
    Name             Value    Description
    _kLessThan_      -1       This object < Other Object.
    _kEqual_          0       This object = Other Object.
    _kGreaterThan_    1       This object > Other Object.
    _kNotOrderable_   2       This class is not orderable.
  </table>
  */
  virtual bool comparedToEarlyImpl(const OdDAI::ApplicationInstance *pOther, OdRx::Ordering &ordering) const override;

  /** \details
  Resets a value for the specified attribute.
  \param explicitAttrName [in] Explicit name of the attribute to reset.
  */
  virtual void unsetAttr(const char * explicitAttrName) override;

  /** \details
  Checks whether the specified attribute is set.
  \param explicitAttrName [in] Explicit name of the attribute to test.
  \returns
  true if the specified attribute is set, false otherwise.
  */
  virtual bool testAttr(const char * explicitAttrName) const override;

  /** \details
  Sets the specified attribute with a given value.
  \param explicitAttrName [in] Explicit name of the attribute to set.
  \param val [in] Value to set.
  \returns
  true if the value is successfully set for the specified attribute, false otherwise.
  */
  virtual bool putAttr(const char * explicitAttrName, const OdRxValue &val) override;

  /** \details
  Checks whether the specified instance is the object derived from or belongs to this class.
  \param entityType [in] Entity to check.
  \returns
  true if the specified instance is the object derived from or belongs to this class, false otherwise.
  */
  virtual bool isKindOf(OdIfc::OdIfcEntityType entityType) const override;

  /** \details
  Returns the type of this entity.
  \returns
  A value of the <exref target="OdIfc__OdIfcEntityType.html">OdIfc::OdIfcEntityType</exref> type that represents type of this entity.
  */
  virtual OdIfc::OdIfcEntityType type() const override;

  /** \details
  Returns an attribute value for the specified attribute definition.
  \param attrDef [in] Attribute definition to query.
  \returns
  OdRxValue object that represents a generic variant type value.
  */
  virtual OdRxValue getAttr(const OdIfc::OdIfcAttribute attrDef) const override;

  /** \details
  Resets a value for the specified attribute.
  \param explicitAttrDef [in] Explicit definition that represents an attribute to reset.
  */
  virtual void unsetAttr(const OdIfc::OdIfcAttribute explicitAttrDef) override;

  /** \details
  Checks whether the specified attribute is set.
  \param explicitAttrDef [in] Attribute definition to test.
  \returns
  true if the specified attribute is set, false otherwise.
  */
  virtual bool testAttr(const OdIfc::OdIfcAttribute explicitAttrDef) const override;

  /** \details
  Sets the specified attribute with a given value.
  \param explicitAttrDef [in] Explicit attribute definition to set.
  \param val [in] Value to set.
  \returns
  true if the value is successfully set for the specified attribute, false otherwise.
  */
  virtual bool putAttr(const OdIfc::OdIfcAttribute explicitAttrDef, const OdRxValue &val) override;

protected:
  // Fields declaration: 
  OdDAIObjectId m_SweptArea;   // IfcProfileDef
  OdDAIObjectId m_Position;   // IfcAxis2Placement3D
};

/** \details
  A data type that represents a smart pointer to a <exref target="OdIfc2x3__IfcSweptAreaSolid.html">IfcSweptAreaSolid</exref> object.
*/
typedef OdSmartPtr<IfcSweptAreaSolid> IfcSweptAreaSolidPtr;

} // namespace

#include "TD_PackPop.h"

#endif // _IFC2X3_IFCSWEPTAREASOLID_AUTO_IMPL_H