/////////////////////////////////////////////////////////////////////////////// 
// Copyright (C) 2002-2025, Open Design Alliance (the "Alliance"). 
// All rights reserved. 
// 
// This software and its documentation and related materials are owned by 
// the Alliance. The software may only be incorporated into application 
// programs owned by members of the Alliance, subject to a signed 
// Membership Agreement and Supplemental Software License Agreement with the
// Alliance. The structure and organization of this software are the valuable  
// trade secrets of the Alliance and its suppliers. The software is also 
// protected by copyright law and international treaty provisions. Application  
// programs incorporating this software must include the following statement 
// with their copyright notices:
//   
//   This application incorporates Open Design Alliance software pursuant to a license 
//   agreement with Open Design Alliance.
//   Open Design Alliance Copyright (C) 2002-2025 by Open Design Alliance. 
//   All rights reserved.
//
// By use of this software, its documentation or related materials, you 
// acknowledge and accept the above terms.
///////////////////////////////////////////////////////////////////////////////

// This file is generated automatically.

#ifndef _IFC4_IFCCURTAINWALL_AUTO_IMPL_H
#define _IFC4_IFCCURTAINWALL_AUTO_IMPL_H

#include "IfcBuildingElementAutoImpl.h"

#include "TD_PackPush.h"

/** \details
  The namespace contains schema-dependent classes, definitions and sub routines
  for work with IFC4 express schema definitions.
*/
namespace OdIfc4 {

/** \details
  A curtain wall is an exterior wall of a building which is an assembly of components, 
  hung from the edge of the floor/roof structure rather than bearing on a floor. 
  Curtain wall is represented as a building element assembly and implemented 
  as a subtype of IfcBuildingElement that uses an IfcRelAggregates relationship.
  
  The geometric representation of IfcCurtainWall is defined using the following multiple shape representations for its definition:
  * Axis: A two-dimensional open curve (for restrictions see below) defining the axis for the curtain wall.
      * This is an optional representation for curtain walls.
  * Body: A surface model or boundary representation model representation defining the 3D shape of the curtain wall.
      * If the IfcCurtainWall has components (referenced by SELF\IfcObject.IsDecomposedBy) then no independent shape 
        representation with RepresentationType = 'Body' is defined. 
        The body of IfcCurtainWall is then geometrically represented by the shape representation of its components. 
        The components are accessed via SELF\IfcObject.IsDecomposedBy[1].RelatedObjects.
      * If the IfcCurtainWall has no components defined (empty set of SELF\IfcObject.IsDecomposedBy) 
        then the IfcCurtainWall can be represented by an shape representation with the RepresentationIdentifier ='Body'.
        
  - Axis 2D Geometry -
  The following additional constraints apply to the 'Axis' representation:
    * Geometry : IfcPolyline having two Points, or IfcTrimmedCurve with BasisCurve of type IfcLine or IfcCircle
    
  - Object Typing -
  This concept can be applied to the following resources:
  * IfcCurtainWallType
  
  - Product Local Placement -
  The following restriction can be imposed by view definitions or implementer agreements:
  * If the IfcCurtainWall establishes an aggregate, then all contained elements are placed relative to the IfcCurtainWall.ObjectPlacement
  
  - Property Sets for Objects -
  This concept can be applied to the following resources:
  * Pset_CurtainWallCommon
  
  - Quantity Sets -
  This concept can be applied to the following resources:
  * Qto_CurtainWallQuantities
*/
class IFC4_EXPORT IfcCurtainWall : public IfcBuildingElement
{
  //DOM-IGNORE-BEGIN
  OD_EXP_DECLARE_MEMBERS(OdIfc4::IfcCurtainWall);
  //DOM-IGNORE-END

public:


  //
  // OdDAI early binding accessors
  //


  /** \details
  Returns the value of PredefinedType attribute. 
  This attribute represents predefined generic type for a curtain wall that is specified in an enumeration. 
  There can be a property set specified specifically for the predefined types.
  \returns
  Returns the value of PredefinedType attribute.
  \remarks
  The PredefinedType is only used if no IfcCurtainWallType is assigned, providing its own IfcCurtainWallType.PredefinedType.
  */
  IfcCurtainWallTypeEnum getPredefinedType() const;

  /** \details
  Sets the value of PredefinedType attribute. 
  This attribute represents predefined generic type for a curtain wall that is specified in an enumeration. 
  There can be a property set specified specifically for the predefined types.
  \param PredefinedType [in] Predefined type to set.
  \remarks
  The PredefinedType is only used if no IfcCurtainWallType is assigned, providing its own IfcCurtainWallType.PredefinedType.
  */
  void setPredefinedType(IfcCurtainWallTypeEnum PredefinedType);


public:

  /** \details
  Default constructor for the IfcCurtainWall class.
  */
  IfcCurtainWall();

  /** \details
  Reads object's data from the specified filer.
  \param rdFiler [in] Pointer to a filer from which to read the data.
  \returns
  A value of OdResult type that contains the result of the method execution.
  */
  virtual OdResult inFields(OdDAI::OdSpfFilerBase* rdFiler) override;

  /** \details
  Writes object's data the the specified filer.
  \param wrFiler [in] Pointer to a filer to which to write the data.
  \returns
  A value of OdResult type that contains the result of the method execution.
  */
  virtual OdResult outFields(OdDAI::OdSpfFilerBase* wrFiler) override;

  /** \details
  Returns a type of a class instance.
  \returns
  Pointer to the <exref target="OdDAI__Entity.html">OdDAI::Entity</exref> type that determines an entity definition within a schema.
  */
  virtual OdDAI::Entity* getInstanceType() const override;

  /** \details
  Returns an attribute value for the specified attribute name.
  \param attrName [in] Name of an attribute to query.
  \returns
  OdRxValue object that represents a generic variant type value.
  */
  virtual OdRxValue getAttr(const char * attrName) const override;

  /** \details
  Early-bound version of instances comparison.
  \param pOther [in] Other application instance.
  \param ordering [out] Receives the ordering (comparison) status.
  \returns
  true if comparison was performed, false if method has no implementation, so late-bound version could be applied.
  \remarks
  If the method returns true,
  the ordering parameter can receive one of the following statuses:
  <table>
    Name             Value    Description
    _kLessThan_      -1       This object < Other Object.
    _kEqual_          0       This object = Other Object.
    _kGreaterThan_    1       This object > Other Object.
    _kNotOrderable_   2       This class is not orderable.
  </table>
  */
  virtual bool comparedToEarlyImpl(const OdDAI::ApplicationInstance *pOther, OdRx::Ordering &ordering) const override;

  /** \details
  Resets a value for the specified attribute.
  \param explicitAttrName [in] Explicit name of the attribute to reset.
  */
  virtual void unsetAttr(const char * explicitAttrName) override;

  /** \details
  Checks whether the specified attribute is set.
  \param explicitAttrName [in] Explicit name of the attribute to test.
  \returns
  true if the specified attribute is set, false otherwise.
  */
  virtual bool testAttr(const char * explicitAttrName) const override;

  /** \details
  Sets the specified attribute with a given value.
  \param explicitAttrName [in] Explicit name of the attribute to set.
  \param val [in] Value to set.
  \returns
  true if the value is successfully set for the specified attribute, false otherwise.
  */
  virtual bool putAttr(const char * explicitAttrName, const OdRxValue &val) override;

  /** \details
  Checks whether the specified instance is the object derived from or belongs to this class.
  \param entityType [in] Entity to check.
  \returns
  true if the specified instance is the object derived from or belongs to this class, false otherwise.
  */
  virtual bool isKindOf(OdIfc::OdIfcEntityType entityType) const override;

  /** \details
  Returns the type of this entity.
  \returns
  A value of the <exref target="OdIfc__OdIfcEntityType.html">OdIfc::OdIfcEntityType</exref> type that represents type of this entity.
  */
  virtual OdIfc::OdIfcEntityType type() const override;

  /** \details
  Returns an attribute value for the specified attribute definition.
  \param attrDef [in] Attribute definition to query.
  \returns
  OdRxValue object that represents a generic variant type value.
  */
  virtual OdRxValue getAttr(const OdIfc::OdIfcAttribute attrDef) const override;

  /** \details
  Resets a value for the specified attribute.
  \param explicitAttrDef [in] Explicit definition that represents an attribute to reset.
  */
  virtual void unsetAttr(const OdIfc::OdIfcAttribute explicitAttrDef) override;

  /** \details
  Checks whether the specified attribute is set.
  \param explicitAttrDef [in] Attribute definition to test.
  \returns
  true if the specified attribute is set, false otherwise.
  */
  virtual bool testAttr(const OdIfc::OdIfcAttribute explicitAttrDef) const override;

  /** \details
  Sets the specified attribute with a given value.
  \param explicitAttrDef [in] Explicit attribute definition to set.
  \param val [in] Value to set.
  \returns
  true if the value is successfully set for the specified attribute, false otherwise.
  */
  virtual bool putAttr(const OdIfc::OdIfcAttribute explicitAttrDef, const OdRxValue &val) override;

protected:
  // Fields declaration: 
  OdDAI::Enum m_PredefinedType;   // IfcCurtainWallTypeEnum  [optional]
};

/** \details
  A data type that represents a smart pointer to a <exref target="OdIfc4__IfcCurtainWall.html">IfcCurtainWall</exref> object.
*/
typedef OdSmartPtr<IfcCurtainWall> IfcCurtainWallPtr;

} // namespace

#include "TD_PackPop.h"

#endif // _IFC4_IFCCURTAINWALL_AUTO_IMPL_H